Use the category as a document index
This page indexes reviewed documents rather than treating category labels as specifications. The archived category capture is dated 20 April 2021 and is titled "8" and 10" Wall Steel Trench Boxes"; that date is not a publication or product revision date. The manufacturer page and the federal protective-system rule appear as separate references. Use them to identify what each document records and what still needs checking against an exact model and actual unit. [4] [5] [2]
What the original category actually covered
The 20 April 2021 capture is titled "8" and 10" Wall Steel Trench Boxes." Its category description names the Titan 8 Lite, Titan Plus 8, Titan Brute 8 and Titan 2 Hybrid in a 10″ wall trench box. That records historical navigation scope only: it does not establish actual wall measurements, present stock, or current owner or manufacturer relationships. The capture date is not a publication, model introduction or revision date. [4]
Archived original category,20April2021
Read the historical listings without merging different names
The archived product cards are labeled Titan 2 Hybrid 10″, Titan Plus 8 and Titan Plus 8 Hybrid. Their size series and Knife Edge text remain card labels, not verified dimensions, order, ratings or safe configurations. These card names do not all match the description's family names, and the archive does not reconcile the difference. Keep Titan 2 Hybrid 10″ separate from Titan II unless a document establishes a link. An archive listing is not proof of a safe configuration or present availability. [4]
Separate the category label from documented wall fields
The manufacturer mainline page lists Titan Plus 8 with “Formed Steel Design Continuous Steel Members” and Titan II Series and Titan Brute 8 with “Formed Steel Design with Continuous Steel Members.” Each named block displays “Side Wall – 8-1/2”. Those page fields are not measured plate thickness or actual-unit geometry. The 8-inch category or model numeral should not be read as a measured dimension. The page does not establish that these entries match the historical labels, or that equal wall fields mean equal construction or capacity. [5]
Manufacturer named-model wall fields
Compare geometry and complete handling records
A comparison can use blank fields for an exact model and serial number, document revision, measured or documented panel geometry, clear work, pipe and access space, complete component and assembled weight, lifting instructions, and the machine configuration or chart used. These are optional, not a worksheet or a safe-depth calculation. The OSHA protective-system rule ties designs drawn from manufacturer tabulated data to the manufacturer's specifications, recommendations and limitations. The supplied extract does not establish a weight, capacity, machine pairing or site suitability; those remain questions for the exact unit and project documents. [2]
OSHA protective-system document requirements
Treat stacking and interfaces as separate evidence questions
Stacking is a separate evidence question. Ask for the matched base and upper model or configuration, connector and component records, the governing data and limitations, and manufacturer written approval where a proposed deviation requires it. A historical stacking or thick-wall term alone authorizes no combination. Keep these as questions for the manufacturer and exact documents, not assembly steps or general stacking permission. [2]
Protective-system limitations and connection evidence
Request the matching model documents
The public manufacturer contact page provides an inquiry route for final applicable drawings and data. Ask for the exact variant and revision, the meaning of the wall field, dimensions and clearances, complete handling records, and approved component combinations. The mainline manufacturer page is a document route, not technical verification of unreviewed product pages or linked entries. The contact page itself establishes only an inquiry destination: it does not confirm dealer status, a reply, current availability, an offer or engineering service. [3]
Compare exact records and keep unresolved fields open
This index compares document records; it does not verify an actual unit or reproduce technical values omitted from the excerpts. The archived category is a historical navigation record, the manufacturer wall fields are attributed webpage text, and the OSHA rule is a US federal reference; its applicable conditions and design roles still need checking. Keep dimensions, weights, capacities, lifting details and stacking combinations unresolved until the exact model documents are matched. A feature missing from these excerpts may exist in the full original, so check the complete documents rather than treating this page as the full record. [4] [5] [2]
Sources
- Occupational Safety and Health Administration: 1926.652 — protective systems
- Kundel: Kundel public contact page — enquiry destination
- TrenchShoringBoxes.com (archived category via Internet Archive): Original eight-inch category —20April2021 archived scope and listing labels
- Kundel: Mainline shield model names and attributed construction/sidewall fields