Navigate the records before treating a size as a configuration
This directory indexes reviewed manufacturer records for V-Panel vocabulary and printed size rows. It groups rows only by the first printed value; those labels do not establish height or length order, working width, an approved assembly or current availability. The family page names options, while the April 2007 sheet supplies literal identifier and size pairs and separate component headings. Use these entries to locate documents, not to select a protective system. This page does not reproduce ratings or replace the original documents. [4] [5]
Start with the family description and its option labels
Kundel’s V-Panel page labels the product “Aluminum Slide Rail System,” lists three-sided and four-sided options, and describes extruded aluminum panels with a steel knife edge at the bottom and a steel tamping block at the top. It attributes aluminum walers and steel telescoping end beams to variable width adjustment and names “Congested Utility and Spot Repair” as primary uses. Treat these as manufacturer vocabulary and option labels to investigate; the page does not establish that a particular assembly is an approved shield or shoring system, nor does it supply adjustment or installation directions. [4]
Manufacturer V-Panel family reference
Printed size rows beginning 6 feet
For rows whose first printed value is 6 feet, the April 2007 sheet lists 562956 — 6’ X 6’; 562958 — 6’ X 8’; 562959 — 6’ X 10’; and 562960 — 6’ X 12’. [5]
Original sheet: four 6-foot-first size labels
Printed size rows beginning 8 feet
The 8-foot-first group contains four printed pairs: 562961 — 8’ X 6’; 562963 — 8’ X 8’; 562964 — 8’ X 10’; and 562965 — 8’ X 12’. [5]
Original sheet: four 8-foot-first size labels
Printed size rows beginning 10 feet
Four rows make up the 10-foot-first group: 562966 — 10’ X 6’; 562968 — 10’ X 8’; 562969 — 10’ X 10’; and 562089 — 10’ X 12’. [5]
Original sheet: four 10-foot-first size labels
Printed size rows beginning 12 feet
In the 12-foot-first group, the sheet records 562971 — 12’ X 6’; 562973 — 12’ X 8’; 562974 — 12’ X 10’; and 561975 — 12’ X 12’. [5]
Original sheet: four 12-foot-first size labels
Keep the box list separate from spreader and adjuster records
The sheet separates “V-Panel Box (Spreaders not included),” “Adjustable Steel Spreader Beams,” “Hydraulic Adjuster (Optional)” and “Spreaders Sold Separately.” Its auxiliary component tables repeat identifiers, values and Side Wall Set headings; that repetition is not evidence that parts are interchangeable. Request the actual bill of materials and the applicable component documents. Do not infer a complete assembly from the box rows alone or treat the component headings as current supply, compatibility or approval. [5]
Original sheet: separate component groups
Resolve the differing waler descriptions before choosing parts
Page 1 of the sheet describes a horizontal frame with aluminum wales and steel telescope end beams; page 2 describes steel horizontal walers with an internal locking design. The manufacturer webpage also uses aluminum-waler wording. These records do not establish whether a variant, revision or error explains the difference, so do not infer a resolution, a named material variant or compatibility. Request the matched final drawing and material schedule for the actual unit. April 2007 is the printed sheet date, not proof of current applicability. [5] [4]
Original two-page sheet: differing frame descriptions
Make utility geometry and system function separate review questions
A blank review record can capture the actual unit, model and configuration; utility locations and crossing geometry; work and access space; whether the task needs shielding or support; applicable system design documents; handling records; and unanswered interfaces. Ask responsible specialists to resolve those fields against the exact manufacturer documents and applicable requirements; this is not a safe configuration, installation procedure or entry permission. OSHA’s protective-system provisions cite manufacturer specifications, recommendations and limitations; preserve their exact scope and conditions when cited. [2]
OSHA protective-system design and documentation reference
Use the family page and size sheet for different questions
Use the family page for attributed vocabulary and option labels; use the inspected sheet for literal identifier and size records. For an actual unit, ask the manufacturer for the current applicable drawing, document revision, component list, geometry, complete handling evidence and clarification of the waler and auxiliary-table differences. The contact page provides an enquiry form and company contact information; it does not establish stock, a dealer relationship, a response guarantee or engineering service. Do not treat unreviewed legacy product pages as verified specifications. [3]
Match the exact unit and leave unresolved fields visible
These records form an index, not a selection. Match any candidate to the exact unit, printed identifier, drawing revision, component list and project geometry. Leave conflicts and missing fields visible; the supplied extracts do not reproduce every technical value, and a value omitted here is not evidence that it is absent from the original document. Where records differ, seek written clarification and responsible specialist review rather than normalizing the labels. [5] [4] [3]