Skip to content
Trench ShoringBoxes

Steel shoring

5-Inch Steel Trench Box Wall Categories: Document Guide

Use archived 5-inch category labels, manufacturer wall fields, and OSHA definitions to compare steel box records while keeping unresolved specifications open.

Use the category as a document index

This page treats the former five-inch category as an index of documents, not as a live product list. It separates the archived category title and card labels from attributed manufacturer wall fields, then adds federal excavation definitions and an enquiry route. Use each entry to see what its document records and which comparison fields remain unresolved. The archive shows historical navigation scope only; it does not establish present stock, ownership, compatibility, ratings, or specifications for any actual unit. The linked documents remain the authority for their own content. [4] [5] [1] [2] [3]

What the original category actually covered

The archived page captured on 20 April 2021 is titled '5" & 6" Wall | Lightweight Steel Trench Boxes.' Its description says the category 'is comprised of the Titan 5 Lite, Titan 5 Lite Utility, Titan 5 Plus, and Titan 6 Lite.' That title and family list define historical navigation scope only. The capture date is not a publication or model revision date, and the wording does not verify wall thickness, present stock, ownership, or manufacturer relationships. Treat the archive as evidence of how the category was labelled, not as a current product catalogue. [4]

Archived original category,20April2021

Read the historical listings without merging different names

The archived product cards name six entries: Hybrid 5 Lite (Smooth-Walled Knife Edge Trench Box), Titan 5 Lite (Stacker Trench Box), Titan 5 Lite (Knife Edge), Titan 5 Utility (Knife Edge), Titan 6 Lite (Knife Edge), and Titan Plus 6 (Knife Edge). The category description instead says Titan 5 Lite Utility and Titan 5 Plus. Those differences remain unresolved; do not silently equate Titan 5 Utility with Titan 5 Lite Utility or Titan 5 Plus with Titan Plus 6. Size series are omitted here. The listings are historical labels, not evidence of safe configurations, dimensions, stack compatibility, or current availability. [4]

Archived product-card labels

Separate the category label from documented wall fields

The manufacturer mainline page attributes 'Formed Steel Design with Continuous Steel Members' and 'Side Wall 5”' to Titan 5 Lite. It lists Titan Plus 5 as 'Formed Steel Design Continuous Steel Members' with 'Side Wall 5”', and Titan Plus 6 with the same construction phrase and 'Side Wall 6-3/4”'. These are webpage fields for named models, not measured plate thickness or evidence for any actual unit. The historical 6 label does not establish a 6-inch plate, and equal displayed values do not prove equal construction, capacity, or identity. Confirm the exact variant and revision separately. [5]

Manufacturer named-model wall fields

Compare geometry and complete handling records

Use an optional blank comparison record: exact model or serial, document revision, measured or documented panel geometry, clear work, pipe, and access space, complete component or assembled weight, applicable lifting instructions, and the machine configuration or chart. OSHA's protective-system rule references the manufacturer's specifications, recommendations, and limitations; those documents belong with any comparison record. This page supplies no actual weight, capacity, machine pairing, or safe depth. The listed fields are prompts for evidence, not a mandatory worksheet, and the rule's exact conditions remain with the cited standard. [2]

OSHA protective-system document requirements

Keep shielding and soil-support requirements distinct

Before comparing boxes, identify whether the project needs a shield, soil support, or another documented control. OSHA defines a shield as a structure that withstands cave-in forces to protect employees within it; shoring supports excavation sides to prevent cave-ins. A wall-category label establishes neither role. The archived listings are not approved systems, and this page does not select a protective system. Keep the project's required control, jurisdiction, and site conditions explicit, then verify the matching system documentation. [1]

OSHA shield and shoring definitions

Request the matching model documents

Use the manufacturer contact page only as an enquiry route. Ask for the final applicable drawings and data, exact variant and revision, the meaning of the wall field, dimensions and clearances, complete handling records, and approved component combinations. Named-model fields on the manufacturer mainline page can identify a document route, but they do not verify an individual product page. A contact form does not establish dealer status, a reply guarantee, a current offer, engineering approval, or site-specific service. [3] [5]

Manufacturer document enquiry

Compare exact records and keep unresolved fields open

Compare the archived label, the attributed wall field, and the actual unit record as separate items. Keep unresolved fields open rather than filling them with assumptions. This directory does not reproduce numerical ratings, weights, capacities, prices, availability, or approved configurations, and an omitted value here is not evidence that the source document lacks it. The selected extracts are not complete documents. Use the linked category, manufacturer fields, OSHA definitions, and contact route to obtain and compare the exact records. [4] [5] [1] [2] [3]

Sources

  1. Occupational Safety and Health Administration: 1926.650 — scope and definitions
  2. Occupational Safety and Health Administration: 1926.652 — protective systems
  3. Kundel: Kundel public contact page — enquiry destination
  4. TrenchShoringBoxes.com (archived category via Internet Archive): Original five-inch category —20April2021 archived scope and listing labels
  5. Kundel: Mainline shield model names and attributed construction/sidewall fields