Start with today’s work
Start the briefing with the task people will perform today. Ask where each worker will stand, how they will get out and what has changed since the last shift. The answers can bring a hazard to light; the conversation is not an inspection or authorization to enter. [2]
What the crew can see and report
In the talk, ‘the exit we discussed is blocked’ is useful evidence from a crew member. It calls for a decision about the actual route and exposure, not a show of hands that the earlier plan is still good. [1] [2] [3]
Ask the crew to describe the work position and the way in and out. Someone who notices a blocked exit or a bent component can identify precisely what has changed. Deciding whether damaged equipment may continue in use is not a crew vote. [1] [3]
Who is inside the shield?
The vocabulary matters. OSHA defines a shield as a structure able to resist cave-in forces and protect the workers inside it. In trenching work, shields used in trenches are often called trench boxes. That protection applies to people within the structure; it does not mean the surrounding soil is supported, that the shield can prevent a collapse, or that it protects anyone outside the box or near the excavation face. Keeping that limit clear matters when the crew's toolbox discussion turns to a trench box. [1]
Shoring is defined separately, as a structure that supports the sides of an excavation and is designed to prevent cave-ins. Keeping the two ideas apart changes the questions: for a shield, is the system rated and configured for this use, and are people protected while entering and exiting it? For shoring in trenching work, what is holding the sides, and what is supporting the soil behind them in these trenches? Blurring them produces confidence the equipment cannot supply. [1]
Can everyone reach the exit?
Access is concrete. In trench excavations 4 feet or greater, a ladder, stairway, ramp or other safe means of egress must be placed so no worker travels more than 25 feet laterally to reach it. In the toolbox discussion, ask where ladders sit in the trenches today, whether trench boxes have moved the work away from them as trenches advance, and whether the route is available before anyone enters. NIOSH's trenching safety guidance makes a similar point about repositioning ladders as the job progresses. [2] [4]
Loose material at the trench edge is a third check. Excavated soil, materials and equipment that could fall or roll into the excavation must be kept at least 2 feet from the edge, restrained by retaining devices sufficient to prevent that movement, or both. That figure covers this type of material and equipment at the edge; it is not a generic safe distance for every machine working near a trench. [2]
What changed since the last inspection?
Conditions move during a shift, and the standard expects them to be rechecked. A competent person must inspect the excavation, including trenches, adjacent areas and protective systems before work starts, as needed throughout the shift, and after every rainstorm or other hazard-increasing occurrence. If evidence of possible cave-ins, protective-system failures, hazardous atmospheres or other hazardous conditions turns up, exposed employees must be removed from the area until the necessary precautions are taken. [2]
Damaged equipment follows a separate path. Materials and equipment used in protective systems must be free of damage or defects that could impair their function. When such equipment is damaged, a competent person examines it and evaluates its suitability for continued use. If that person cannot assure it can support the intended loads or is otherwise suitable for safe use, it is removed from service and needs evaluation and approval by a registered professional engineer before returning. [3]
NIOSH advises workers who see a problem with a protective system to leave the trench and contact the competent person. A cave-in may give no warning. Discuss who to call and where the crew can find the site emergency plan. [4]
Sources
- 29 CFR 1926.650: Scope, application, and definitions applicable to this subpartOccupational Safety and Health Administration
- 29 CFR 1926.651: Specific excavation requirementsOccupational Safety and Health Administration
- 29 CFR 1926.652: Requirements for protective systemsOccupational Safety and Health Administration
- Preventing Worker Deaths from Trench Cave-ins (NIOSH Workplace Solutions 2011-208)CDC and NIOSH