OSHA & safety
OSHA Trench Shoring Safety Guides: Choose a Reference
Choose a reference article on excavation hazards, soil classification, shield provisions, post-selection questions or shield boundaries, with federal source and jurisdiction guidance. Educational only; not a compliance audit.
Choose a reference for your question
This hub maps reference articles for US federal construction excavation requirements. OSHA 1926 Subpart P applies to open excavations, including trenches, and defines competent person, protective system and shield. 1926.650 covers scope and definitions; 1926.651 covers site conditions, access and inspections; 1926.652 covers protective systems. State or territorial programs may differ, so confirm the rules for the project's jurisdiction. Use the entries to locate coverage. Where a question depends on site conditions, classification, inspection findings or protective-system design, seek competent-person or registered-professional-engineer input as applicable. These are educational references, not a compliance audit or training certification. [1] [2] [3] [4]
Recognizing excavation hazards
This entry covers hazard-recognition topics and an optional record of observations, missing information and follow-up for an excavation assessment. Use it to locate that coverage; it does not establish legal rules, site conditions or final approval.
Recognizing excavation hazards
Soil classification and reassessment
This entry compares soil classifications, the conditions that affect them and the role of classification in protective-system review. Use it to locate that topic and reassessment coverage; it does not decide a site classification or approve a protective system.
Soil classification and reassessment
Shield provisions and source references
This entry provides a requirement-to-source reference for design documentation, use limits and related excavation duties in a shield plan. It can help organize a review, but it does not approve a shield, confirm a configuration or replace the governing standard or project design.
Shield provisions and source references
Questions beyond the trench box
This entry addresses questions remaining after a trench box is selected. It separates hazard topics and offers optional prompts for recording what the box addresses and what still needs follow-up. It is a planning aid, not evidence that the selected box covers every condition or that the work is compliant.
Questions beyond the trench box
Shield boundaries and interfaces
This entry presents a protected-space topic map and an optional record for sidewalls, ends, top, bottom, access and movement. It does not establish dimensions, installation limits or site-specific suitability.
Shield boundaries and interfaces
Check the source and its scope
Check each linked guide and the cited standard section before relying on a statement. The federal references are OSHA 29 CFR Part 1926 Subpart P: 1926.650 for scope and definitions, 1926.651 for specific excavation requirements, and 1926.652 for protective systems. Confirm whether a state or territorial program applies and what it requires. Check the applicable revision and any project-specific design or tabulated data. This page is navigation, not a site-specific interpretation or approval. [1] [2] [3] [4]
Sources
- Occupational Safety and Health Administration: 1926.650 — scope and definitions
- Occupational Safety and Health Administration: 1926.651 — specific excavation requirements
- Occupational Safety and Health Administration: 1926.652 — protective systems
- Occupational Safety and Health Administration: State Plans — introductory scope