Two manhole shields on one sheet
Kundel’s Titan Manhole Shields sheet has separate panels for the 3 and 5 Rap-O-Round. Read the features and length rows under the matching model name: both models have an eight-foot length, but they do not have the same walls or hardware dimensions. [4]
The manufacturer’s Manhole Shields page has separate 3 and 5 Rap-o-Round headings. It describes all-steel manhole shields and names features including a reinforced knife edge, an internal stacking system and reinforced sockets. Those are family descriptions, not a unit-specific drawing, handling document or confirmation of stock. [3]
The January 2001 copyright dates the literature, not the manufacture of an individual box. [4]
Walls, sockets and the shared knife-edge taper
A knife-edge taper cannot distinguish the 3 from the 5 on this sheet because both feature lists give the same figure. Other lines do distinguish the panels, but none identifies a compatible stacker for a unit in the yard. [4]
Both models have a printed 24-inch knife-edge taper and the same cutting-bar dimensions. Those features do not distinguish the two models. [4]
Kundel lists a 5-inch wall and 5-inch socket for the Titan 5, versus a 3-inch wall and 3-inch socket for the Titan 3. Pounding pads are 1 inch on the Titan 5 and ¾ inch on the Titan 3. The socket figures do not identify a matching spreader. [3] [4]
The sheet labels Stacker and Knife Bottom in its illustration, and the Titan 5 table includes an 8′ Stacker column. Neither identifies a permitted base-and-extension combination for a particular pair of units. The footer says spreaders are sold separately. [4]
Cutout and handling limits
A manhole shield protects people inside from cave-in forces. It does not shore the sides of the excavation. [1]
The Titan 5 sheet lists shield weight and machine weight separately without identifying the weight unit or the components weighed. Neither column establishes the weight of the assembled shield on site. Employees must stay out of a shield during installation, removal or vertical movement. [4] [2]
The “Standard Cut Out 2′ x 2′” label illustrates one shape. To see whether a pipe, ring or structure will clear the opening, use the dimensioned drawing for the identified unit. [4]
Depth and loading
The 5 in the name is not a capacity. “Production Depth” is the brochure’s description, not a soil-pressure calculation. Check the marked box and proposed conditions against the applicable design. [4]
The marked box on site
If the design uses manufacturer’s tabulated data, the manufacturer’s specifications, recommendations and limitations apply. A departure needs specific written manufacturer approval, and the written information must be available at the jobsite while the system is constructed. [4] [2]
A competent person must examine damaged equipment. If they cannot assure its suitability, remove it from service until a registered professional engineer evaluates it and approves its return. [4] [2]
Sources
- 29 CFR 1926.650: Scope, application, and definitions applicable to this subpartOccupational Safety and Health Administration
- 29 CFR 1926.652: Requirements for protective systemsOccupational Safety and Health Administration
- Titan Series Manhole BoxKundel Industries
- Titan Manhole Shields — Titan 5 Rap-O-Round panel (© January 2001)Kundel Industries