Skip to content
Trench ShoringBoxes

Manhole boxes

What to Request When Comparing Manhole Box Suppliers

How to compare manhole box proposals: match the opening layout to the work, identify the governing drawings, and distinguish included parts and warranty terms.

Updated November 20, 20263 min read

Compare boxes for the same manhole

Two boxes with similar outside dimensions can leave very different room to work. Give each supplier the same manhole drawing, pipe-entry elevations and site conditions. Ask for the particular assembly it proposes, not just a brochure for the family. [3] [5]

A shield protects workers inside it against cave-in forces; shoring supports excavation sides. If an offer includes both, identify which part performs each function and which design covers it. [1] [3]

The structure and the space around it

Show the outside footprint of the structure, its depth and wall thickness, the size and elevation of pipe entries, and where people must stand to set the structure or connect pipe. Compare that space with the proposed shield’s inside dimensions and openings. [1]

Include the planned excavation depth, observed soil and water conditions, nearby structures and utilities, and spoil and equipment positions. Locate the way out: in a trench 4 feet deep or more, employees must not have to travel more than 25 feet laterally to reach safe egress. [2]

Which openings and options are on the quoted box?

The four-sided outline is a useful starting point for a supplier question: which walls, doors or cutouts would the quoted unit actually have? The drawing here is generic. A family brochure identifies options; the supplier’s exact drawing and the applicable serialized tables identify what is covered. [4] [5]

Four-sided steel manhole box
Four-sided manhole box: a family shape does not identify the quoted options.

Pro-Tec’s brochure distinguishes single- and double-wall Man 4 models from its Octagon, Pro-Corr round and four-sided tap-box families. Cutouts, replaceable doors and stacking pockets are options. A family listing does not tell you that a particular box has the door you need or that a proposed stack is permitted. [4]

Pro-Tec directs owners to the serialized tables for their equipment. Its jobsite photographs illustrate products, not approved arrangements for another job. [5]

Match the quote to a drawing number and revision, model or serial identifier, openings and spreader positions. Where the design uses manufacturer data, follow every specification, recommendation and limitation. A deviation requires the manufacturer’s specific written approval; the written material must be at the jobsite during construction of the system. [3]

Other tabulated data must identify the approving registered professional engineer, selection parameters and limits of use. A project-specific engineer’s design identifies the engineer and shows the sizes, types and configurations of the materials. [3]

Replacement parts and damaged units

For a quoted door, for example, ask which part number fits this box and who can confirm it against the drawing. Availability for the family does not establish availability for the unit. [4]

OSHA 1926.652(d) frames the damage questions. Materials and equipment for protective systems must be free from damage or defects that could impair proper function, and must be used and maintained consistently with the manufacturer's recommendations without exposing workers to safety hazards. When a box used at a manhole is damaged, a competent person evaluates its suitability for continued use; if that person cannot assure it will support the intended loads or is otherwise safe, it comes out of service and needs evaluation and approval by a registered engineer before return. [3]

Warranty authorization starts a claim. It is not approval to return a damaged box to service. [6] [3]

Price, freight and warranty coverage

Pinnacle Manufacturing’s limited warranty illustrates why freight belongs in the comparison. Its terms for the original customer of new Pinnacle products cover defects in material and workmanship under normal use and service, exclude transport costs to and from the customer, and require authorization before warranty work. [6]

Do not assume those terms cover a resale, rental or another manufacturer’s product. Read the terms attached to the actual quote. [6]

Compare what each price buys: the box, spreaders, pins, cutouts, doors and any separately supplied parts. Confirm freight in both directions and who pays for parts and labor on a covered repair. [4] [5]

Sources

  1. 29 CFR 1926.650: Scope, application, and definitions applicable to this subpartOccupational Safety and Health Administration
  2. 29 CFR 1926.651: Specific excavation requirementsOccupational Safety and Health Administration
  3. 29 CFR 1926.652: Requirements for protective systemsOccupational Safety and Health Administration
  4. Trench Shielding and Shoring: mainline literature (2019)Pro-Tec Equipment
  5. Manhole Trench ShieldsPro-Tec Equipment
  6. Product Limited WarrantyPinnacle Manufacturing