Skip to content
Trench ShoringBoxes

Aluminum shoring

V-Panel 10-series: four model numbers on the April 2007 sheet

Find the four 10-series manufacturing numbers on Kundel’s April 2007 sheet. The nominal sizes identify catalog rows; the drawing shows the opening with the specified beams fitted.

Updated November 20, 20262 min read

Page 2: manufacturer number and printed size

The last two nominal sizes increase from 10′ × 10′ to 10′ × 12′, but the manufacturing numbers do not follow a sequence. [2]

The April 2007 sheet pairs 10 by 10 with 562969 and 10 by 12 with 562089. The latter is the printed number, not an extrapolation.10′ X 10′Page 2 manufacturingnumber: 562969.10′ X 12′Page 2 manufacturingnumber: 562089.
The last two 10-series rows break a numbering pattern.

Page 2 of Kundel’s April 2007 sheet gives four size and manufacturing-number pairs beginning with 10 feet. It also has columns headed “wgt.” and A, B and C; they do not establish inside clearance, permitted load or the weight of a fully equipped assembly. [2]

Mfg no.Size as printed
56296610’ X 6’
56296810’ X 8’
56296910’ X 10’
56208910’ X 12’
[2]

The number beside 10′ × 12′ is 562089, not a continuation of 562969. April 2007 is the date of the sheet, not a build date. [2]

Shared notes, not differences between sizes

  • Printed size: The sheet does not define the dimension order. The common 10 feet is not a stated clear width.
  • Supplied components: The box listing excludes spreaders. Page 2 lists adjustable spreader beams separately and marks the hydraulic adjuster optional; it does not assign either to an individual box row.
[2]

Kundel describes three- and four-sided layouts for the V-Panel family. To compare two 10-series offers, specify which ends need to be enclosed and ask each supplier to show that layout on the drawing for its unit. [1] [2]

Comparing the actual work openings

Start with the number, not just “10-series.” For a unit offered as 10’ X 8’, for example, ask for the assembly drawing and revision applicable to 562968 and the unit identifier. Request the drawing key for the printed size, the parts schedule identifying walers and beams, and the clear length, width and vertical opening at the proposed crossing. A second offer needs the same information for its own manufacturer number. [2] [1]

Compare those openings at the same location and along the same axes. For a handling or design decision, also obtain the assembled mass with the listed components and the written limits for that configuration. A change from 10’ X 8’ to 10’ X 12’ on the historical sheet establishes a different catalog entry, not four more feet of usable clearance. [2]

Sources

  1. V-PanelKundel
  2. V-Panel Box product sheet (Safeguard Series)Kundel