Skip to content
Trench ShoringBoxes

Aluminum shoring

Kundel V-Panel: family documents and manufacturing-number lookup

Kundel’s April 2007 V-Panel catalog pairs sixteen nominal sizes with manufacturing numbers. The frame and spreaders for a particular layout are a separate question.

Updated November 20, 20262 min read

Three- and four-sided V-Panel layouts

Three-sided and four-sided describe layouts. A number such as 562089 identifies a size in the catalog; the drawing for the actual layout identifies its beams. [2] [3]

The family page covers sided options. The April 2007 register pairs sizes and numbers. The unit drawing and parts list identify a particular assembly.Family pageThree- and four-sided options for the productline.April 2007 register16 size and manufacturing-number pairs; nospreaders included.Matched unit drawingNeeded to identify the sided layout, frame andbeams.
Family options, sizes and the parts of an individual assembly.

Kundel calls V-Panel an aluminum slide rail system for congested utilities and spot repairs. Its family page describes three- and four-sided options. Neither that page nor an entry in the size register establishes which layout, frame and spreaders are permitted for a particular unit. [2] [3]

The April 2007 catalog lists spreaders separately. To determine which beams and connections belong in a three- or four-sided assembly, match the marking on the box to the manufacturer’s drawing and parts list. [2] [3] [1]

Manufacturing numbers by printed size

Read across a row: for example, 10′ X 12′ is printed with manufacturing number 562089. The numbers below reproduce page 2, including entries that break the sequence. They are box identifiers, not individual serial numbers or a list of components on hand. [3]

First size dimension× 6′× 8′× 10′× 12′
6′562956562958562959562960
8′562961562963562964562965
10′562966562968562969562089
12′562971562973562974561975
[3]

What adjusts, and what still needs a drawing

Kundel describes two adjustments. Each clamped panel can move up or down independently; telescoping end beams change the width of the horizontal frame. Neither feature gives the clear opening at a crossing for a particular assembly. [2]

On page 2 of the April 2007 sheet, the box heading says ‘Spreaders not included.’ Adjustable spreader beams are listed separately and the hydraulic adjuster is optional. Match the frame and beam part numbers to the drawing for the marked box before comparing what two suppliers include. [3]

Sources

  1. 29 CFR 1926.652: Requirements for protective systemsOccupational Safety and Health Administration
  2. V-PanelKundel
  3. V-Panel Box product sheet (Safeguard Series)Kundel