Skip to content
Trench ShoringBoxes

Aluminum shoring

V-Panel 8 series: archived sizes and Kundel manufacturing numbers

Four size labels from the old V-Panel listing match four manufacturing numbers in Kundel’s April 2007 catalog. A worked example shows how a yard label can disagree.

Updated November 20, 20262 min read

Four nominal sizes in two records

The archived seller listing distinguishes the four V-Panel variants by size label. Kundel’s V-Panel Box sheet has four rows with the same nominal sizes, each with its own manufacturing number. The records can be compared by size; neither identifies the box in your yard. [1] [2]

Archived listing labelSize on sheetMfg no. on sheet
8x68′ X 6′562961
8x88′ X 8′562963
8x108′ X 10′562964
8x128′ X 12′562965
[1] [2]

The seller supplied the labels in the first column; the manufacturing numbers and sizes come from page 2 of Kundel’s April 2007 V-Panel Box sheet. The sizes are nominal, not inside clearances. Spreaders were not included. [1] [2]

When the number and the size disagree

In the example below the size and number are both printed in the catalog, but not on the same row. Neither one can be used to correct the other without seeing the box marking. [2]

Two lookups, two different V-Panel rowsHypothetical card 562964, 8 by 6: the manufacturer number matches the 8 by 10 row; the size matches the 562961 row. The actual unit remains unidentified.When a yard card points to two rowsHYPOTHETICAL YARD CARD562964 | 8′ × 6′Look up the number562964Size on sheet: 8′ × 10′Look up the size8′ × 6′Number on sheet: 562961Conflict to resolve against the original marking
Example: one yard card points to two V-Panel rows.

Suppose the yard card says “562964 — 8′ X 6′.” Page 2 pairs that number with 8′ X 10′; its number for 8′ X 6′ is 562961. Flag both entries as a conflict. Don’t correct either one until you can compare the original marking and the document issued for the unit. [2]

Number 562962 does not appear between 562961 and 562963 on this sheet. If it appears on a box, check the original marking with Kundel rather than assigning a size by sequence. [2]

Keep a photo of the mark with its transcription, the serial or asset tag, and the title, date and page of the document you compared. If only “8x12” is legible, record that fragment. It identifies a size to investigate, not a confirmed manufacturing number. [1] [2]

Sources

  1. Kundel V-Panel Aluminum Trench Box, 8×6 to 8×12 (archived product page)TrenchShoringBoxes.com (archived listing)
  2. V-Panel Box product sheet (Safeguard Series)Kundel