Skip to content
Trench ShoringBoxes

Aluminum shoring

ShoreLite Lite 6×5, 6×6 and 6×7: label versus working space

Compare the three archived labels with the separate April 2005 panel and connector notes. An assembled drawing, not a size pair, establishes pipe clearance.

Updated November 20, 20262 min read

What the three size labels tell you

The apparent progression from 6×5 to 6×7 belongs to the seller’s labels. A panel profile on the family sheet cannot turn that progression into a difference in clear space: neither record identifies the inside faces or members from which to measure. [1] [2]

The seller names three ShoreLite Lite sizes; the family sheet describes panels and connections. The assembled opening is not supplied by either record.Seller headline6×5, 6×6 and 6×7 are distinct labels.April 2005 sheetPanel profile and connection choices describethe family.Missing for fitA drawing that identifies the clear opening foreach assembly.
Three labels, but no scale for the usable opening.

The archived ShoreLite Lite listing names 6×5, 6×6 and 6×7. Neither the headline nor Kundel’s April 2005 family sheet defines the dimension order or gives the inside opening for any of the three. Choosing 6×7 over 6×5 does not guarantee two more feet of working room. [1] [2]

Panels and connectors on the April 2005 sheet

Kundel’s April 2005 sheet describes a single 2.5-inch panel profile, stackable panels 3 feet high in various lengths, and kits equipped with standard required connectors. A panel profile is a property of a component. It is not an inside width, and subtracting it from a headline number would not give a usable opening. [2] [1]

For “6’ tall Kits” the sheet reads: “6 Spreaders, Screw Struts, or 12 Square Connectors.” Keep that wording with the family sheet. It neither assigns a connection option to one of the three seller labels nor establishes that all three labels denote kits 6 feet tall. [2] [1]

The drawing needed for a fit comparison

Give the supplier the full unit marking, not just the headline size. Ask for the applicable assembly drawing and revision showing the panel orientation, members and their positions, inside width between the sides, unobstructed length, and vertical clearance where the pipe would pass. Identify the pipe’s outside dimensions and crossing location on the job sketch so the reviewer knows which opening matters. [1] [2]

The matching parts list also matters for handling: the weight needed is that of the assembled box with its fitted components, not a figure inferred from panel height or a family kit count. [2] [1]

Sources

  1. ShoreLite Lite Modular Aluminum Trench Box, 6×5, 6×6 and 6×7 (archived product page)TrenchShoringBoxes.com (original archived listing via Internet Archive)
  2. ShoreLite Lite product sheet (archived copy)Kundel document linked from original TrenchShoringBoxes listing (archived copy)