Skip to content
Trench ShoringBoxes

Aluminum shoring

What came in the 8-foot ShoreLite Modular kit?

The catalog counts eight panels, twelve connectors and four tamping plates. The five side-wall set labels and their weights describe sets, not complete assemblies.

Updated November 20, 20263 min read

Five side-wall set labels

The archived ShoreLite Modular listing names five sizes: 8×4, 8×6, 8×7, 8×8 and 8×10. The linked Kundel sheet lists them as side-wall sets and gives their weights in pounds, not the weight of a fully equipped box. [3] [4]

The manufacturer’s labels run from SLP - 8′ X 4′ - M to SLP - 8′ X 10′ - M. The sheet gives no key to the dimension order; an 8×10 label does not establish the size of the opening between the assembled members. [3] [4] [1]

What was included?

The eight-foot kit heading lists eight aluminum panels, twelve panel connectors and four tamping plates; spreaders are not included. The sheet separately lists spreaders and spreader adjusters as accessories. Those accessory entries do not assign a spreader or adjuster to any of the five SLP side-wall sets. [4]

A separately hosted sheet dated April 2007 lists the same parts and exclusions. The entries agree, but that does not establish that the two copies are the same revision. [5]

The family accessory list names steel spreaders, steel spreader adjusters and solid steel push pads. It does not identify parts fitted to an individual set. [4]

Shielding or shoring?

Federal excavation terminology distinguishes a shield, which resists cave-in forces to protect employees within, from shoring, which supports the excavation sides. The seller’s title calls the product a trench box; Kundel describes the broader family as shielding/shoring. Neither label shows which function a proposed configuration is designed to perform. [1] [3] [4]

A protective system must resist the loads intended or reasonably expected. If the design uses manufacturer’s tabulated data, follow its specifications, recommendations and limitations; departures require the manufacturer’s specific written approval. Keep the written data on site while the system is constructed. Workers must not be inside shields during installation, removal or vertical movement. [2]

How the six-foot kit compares

The eight-foot kit has two more panels than the six-foot kit, but not two more connectors. Both kit lists exclude spreaders. [4]

ShoreLite kit countsSix- and eight-foot kit headings list six and eight panels respectively. Both list twelve panel connectors, four tamping plates and no spreaders.ShoreLite kit countsOne mark = one listed item6′ kit8′ kitAluminum panels68Panel connectors1212Tamping plates44SpreadersNot includedNot included
ShoreLite kit inventory, compared one component at a time.

The six- and eight-foot kit headings differ in panel count: six versus eight. Both list twelve connectors, four tamping plates and no spreaders. A separate Side Wall Set Wgt. column also distinguishes some rows: SLP - 6′ X 10′ - M is listed at 703 lb and SLP - 8′ X 10′ - M at 890 lb. These are set weights, not verified assembled or lifting weights. [4]

To establish lifting weight, identify the assembly and all fitted parts, then obtain the weight and handling instructions for that combination. Neither the 703-pound nor the 890-pound side-wall figure gives that answer. [4] [5]

Sources

  1. 29 CFR 1926.650: Scope, application, and definitions applicable to this subpartOccupational Safety and Health Administration
  2. 29 CFR 1926.652: Requirements for protective systemsOccupational Safety and Health Administration
  3. ShoreLite Modular Aluminum Trench Box System, 8×4 to 8×10 (archived product page)TrenchShoringBoxes.com (original archived listing via Internet Archive)
  4. ShoreLite Modular Aluminum Trench Box product sheet (archived copy)Kundel document linked from original TrenchShoringBoxes listing (archived copy)
  5. ShoreLite Modular product sheet (Safeguard Series)Kundel Industries