Skip to content
Trench ShoringBoxes

Steel shoring

Basic 3 steel trench boxes: the six 4-foot-high ST models

Compare the six Basic 3 ST rows by height, length, published pounds and front-to-rear clearance. Distinguish the sheet’s values from the assembled weight of an identified unit.

Updated November 20, 20262 min read

Reading H × L

The drawing separates the two panel directions on the printed H × L row. For B3 - 4′ X 10′ - ST those directions are height and length; the width between the two sides would be a third measurement, absent from that identifier. [2]

Trench box panel with height and length dimensions LENGTH HEIGHT
Panel height and length in a Basic 3 H × L row; generic illustration, not to scale.

The archived Basic 3 listing grouped six short steel boxes, from 4×4 to 4×10. Kundel’s upper Basic 3 table supplies the key the listing lacks: “Model - H x L Style.” The first number is nominal height in feet; the second is nominal length. A 4×10 is therefore 4 feet high and 10 feet long. Neither figure is the width between the side walls. [2] [1]

Six models, one printed style

Model as printedPublished weight (lb)Front to rear (in), by nominal lengthSpreader table
B3 - 4′ X 4′ - ST48036A
B3 - 4′ X 5′ - ST56548A
B3 - 4′ X 6′ - ST64560A
B3 - 4′ X 7′ - ST72572A
B3 - 4′ X 8′ - ST82484A
B3 - 4′ X 10′ - ST984108A
[2]

All six models carry the ST suffix. The 7-foot and 8-foot entries illustrate the difference between length and clearance: 72 and 84 inches are the respective front-to-rear openings, not widths. [2]

What the listing does not price or measure

The seller called the line the “Lightest/Most Affordable Steel Box in Industry.” The April 2021 capture gives no competing weights or prices to support that comparison and is not a current offer. [1]

The Basic 3 ‘Weight’ column explicitly says ‘POUNDS.’ Each ST model points to spreader table A, which lists weights in pounds by spreader length. The model rows do not say which spreader set is fitted or whether its weight is included in the published box weight. For handling, use the documented weight of the unit as assembled. [2]

Sources

  1. Basic 3 Steel Trench Box, 4×4 to 4×10 (archived product page)TrenchShoringBoxes.com (original archived listing via Internet Archive)
  2. The Basic 3 All Steel Trench Box — Basic 3 model weights, clearances and spreader table AKundel Industries