Skip to content
Trench ShoringBoxes

Aluminum shoring

Comparing fixed panels, modular layouts and adjustable spreaders

See Corru-Lite and Build-A-Box side by side. Separate family options from the parts, openings, assembled weights and written data confirmed for two actual offers.

Updated November 20, 20262 min read

Compare features that can coexist

Look at the two sides first, then at the members crossing the gap. A question about which panels form the sides is different from a question about whether the spreader adjusts. A supplier can describe both features on the same build without treating one as an alternative to the other. [4] [5]

Modular aluminum trench box with adjustable spreaders
Panel construction and spreader choice describe different parts of a shield.

A fixed panel shape can coexist with adjustable spreaders. “Modular” describes how components make up the sides and ends; “adjustable” may describe the spreader between the sides. Instead of asking which of those three labels wins, ask what the proposed arrangement leaves open for the pipe, the worker and the exit. [4] [5] [2]

FeatureEfficiency Production: Corru-Lite CLGME: Build-A-Box
PanelsCorrugated aluminum with top and bottom steel capsModular aluminum side and back panels
LayoutMolded end membersTwo-, three-, four- and eight-sided arrangements described
Connections and optionsStatic aluminum, adjustable aluminum or adjustable steel spreaders; leg kit and stacking pins listedCorner posts, pins and keepers; spreader arrangement depends on sides and ends
[4] [5]

The Corru-Lite description is on page 9 of Efficiency Production’s Aluminum Trench Shield Product Application Guide. GME’s Build-A-Box brochure illustrates the modular family and identifies accessories on page 3. These are family descriptions, not verified configurations or interchangeable parts lists. [4] [5]

Compare the usable opening on each offer

Treat outside width, clear width between panels and clearance under a spreader as three different measurements. Compare the same axes and the same pipe or fitting envelope in both offers. A leg kit in a catalog does not mean it is on either unit. An available ladder bracket does not establish that workers can reach a usable exit as the work advances. [4] [5] [2]

When the catalog description changes the question

Efficiency’s guide also describes XLAP-SF panels with steel tube frames and Alum-A-Shield with hydraulic or static spreaders. A hydraulic spreader option on a shield does not by itself make the assembly hydraulic shoring. Check the documented function: shielding protects employees within the structure against cave-in forces; shoring supports the excavation sides. [4] [1]

A pickup-transport claim is not the lifted weight of a particular build. Request the assembly weight, included hardware, handling instructions and machine chart for the planned movement. For protective-system design based on manufacturer’s data, follow the applicable specifications, recommendations and limitations; obtain specific written manufacturer approval for deviations. Record unanswered items before treating two offers as equivalent. [3] [4] [5]

Sources

  1. 29 CFR 1926.650: Scope, application, and definitions applicable to this subpartOccupational Safety and Health Administration
  2. 29 CFR 1926.651: Specific excavation requirementsOccupational Safety and Health Administration
  3. 29 CFR 1926.652: Requirements for protective systemsOccupational Safety and Health Administration
  4. Aluminum Trench Shield Product Application GuideEfficiency Production / Arcosa Shoring Products
  5. Build-A-Box Modular Aluminum Trench Shielding System — features and assemblyGriswold Machine & Engineering / Arcosa Shoring Products