Skip to content
Trench ShoringBoxes

Bedding boxes

Coordinating Bedding Boxes, Stone Boxes, and Gravel Boxes on Utility Sites

What to settle before staging bedding material in a stone or gravel box: utility-location timing, equipment routes, falling-material separation, and the documents still needed.

Updated November 20, 20263 min read

Plan one delivery from truck stop to pipe crew

The bedding box holds stone at the delivery point. It does not protect the pipe crew at the work position or on the way there. [4] [1] [2]

Bedding stone box (gravel box) loaded with stone
A bedding box holds aggregate for the pipe crew.

A bedding box stages material for pipe installation. Kundel calls these containers bedding boxes or stone mizers and lists Basic and Titan series, among other options. A gravel or stone box at the delivery point does not protect anyone in the trench: that is the function of a shield designed for cave-in forces. [4] [1]

Trace one load on the site layout: where the truck stops, where its material goes, where the excavator and bucket move, and where the person placing bedding will stand. Include the walk back out. Agree on the layout before treating the chosen spot as a delivery address. [2] [3]

Separate the delivery route from people and utilities

Determine estimated utility locations before opening the excavation and contact the owners within the established or customary local response times. As work approaches an estimated location, establish the exact location by safe and acceptable means. Protect, support or remove exposed installations as necessary to safeguard employees. Mark the relevant services on the staging layout as well as the trench plan. [2]

Employees must not be under loads handled by lifting or digging equipment. Keep employees clear of vehicles being loaded or unloaded so spilled material cannot strike them; the protected-cab exception for an operator does not extend to people on foot. Check both the truck discharge area and the path between the box and the trench. [2]

Where an excavator or other mobile equipment operates beside an excavation, or must approach the edge, and the operator lacks a clear, direct view of that edge, 1926.651(f) requires a warning system such as barricades, hand or mechanical signals, or stop logs. Grading away from the excavation is preferable where possible. Route planning should flag which approaches need one. [2]

Resolve ground support, falling material and handling separately

For material or equipment that could fall or roll into the excavation, use a setback of at least two feet, sufficient retaining devices, or both as needed. That addresses falling material. It is not a siting distance for a loaded container and does not establish that the ground will carry the container or an excavator beside it. [2]

Check the ground under the proposed location and the route: water, previous backfill, equipment weight and vibration can affect soil stability. Identify hazardous surface encumbrances and any adjoining structure whose stability is endangered. Ground support, separation distances and machine position require a site-specific answer, not a dimension from a family brochure. [2] [3]

A funnel top or drag bar in a product description is not a designated lift point or a handling instruction. Ask the document owner for the exact unit, its intended load and its written handling information. Leave unanswered questions open rather than planning a lift from the name of a feature. [4]

Recheck both ends when the container moves

Moving the box changes more than its footprint. A truck may now approach a blind edge; a bucket may cross yesterday’s foot route; the new spot may sit over disturbed ground. Recheck the delivery and receiving ends, update the layout, and tell the driver, operator and pipe crew what changed before using the revised route. [2] [3]

Where exposure is reasonably anticipated, a competent person inspects the excavation, adjacent areas and protective systems before work daily, as needed during the shift and after rainstorms or other hazard-increasing occurrences. If that person finds evidence of a hazard, remove exposed employees until necessary precautions have been taken. [2]

Sources

  1. 29 CFR 1926.650: Scope, application, and definitions applicable to this subpartOccupational Safety and Health Administration
  2. 29 CFR 1926.651: Specific excavation requirementsOccupational Safety and Health Administration
  3. Preventing Worker Deaths from Trench Cave-ins (NIOSH Workplace Solutions 2011-208)CDC and NIOSH
  4. Bedding BoxesKundel Industries