Skip to content
Trench ShoringBoxes

Steel shoring

Titan 3 Plus Utility: how the knife edge and sockets compare with Lite

Compare the Plus and Lite labels on Kundel’s January 2001 sheet and separate them from the family description of construction and production depth.

Updated November 20, 20262 min read

Plus and Lite on the same utility sheet

On the utility sheet, the feature labels distinguish Plus from Lite; on the family page the order of “3” and “Plus” changes. Keep those two comparisons separate so a change in wording is not mistaken for a third model. [2] [3]

The sheet calls one panel Titan Plus 3 Utility and another Titan 3 Lite Utility. The family page calls the Plus entry Titan 3 Plus Utility.Sheet: Titan Plus 3 UtilityPlus panel: larger printed taper and socketfigures.Sheet: Titan 3 Lite UtilityLite panel: smaller figures for the same twolabels.Page: Titan 3 Plus UtilityDifferent word order for the Plus family entry.
The Plus/Lite distinction and the Plus name reversal.

The Titan 3 Plus Utility and Titan 3 Lite Utility have different knife-edge tapers, socket sizes and stacking lug bars. Kundel’s Utility page and the January 2001 brochure agree on the dimensions below. [2] [3]

Catalog dimensionTitan 3 Plus UtilityTitan 3 Lite Utility
Knife-edge taper18 inches12 inches
Socket size5 inches3 inches
Solid stacking lug bar2½ inches2 inches
[2] [3]

The sheet says “Titan Plus 3 Utility”; Kundel’s Utility family listing says “Titan 3 Plus Utility.” Neither explains the word order. It is not evidence of a separate model or a design change. [2] [3]

What the Titan 3 Plus Utility family description adds

Kundel describes the Plus as a solid-welded, all-steel shield for light work and lists manholes, spot repairs and mainline applications. Its advertised “production depths” of 12 to 20 feet are not a site-specific depth rating. [2]

Solid-welded, all-steel construction is shared with Lite, not a Plus-only distinction. For Plus, the family page also names a 2½-inch solid stacking lug bar, a ½ × 3-inch cutting bar and reinforced through-wall sockets. It describes the 18-inch knife edge taper as reinforced. [2]

Accessories are listed separately. A socket dimension is not a list of approved spreaders or a connection rating. For a proposed purchase, ask for the marked model, the matching component drawing and the applicable manufacturer data; compare the quoted accessories with that drawing. [2] [3] [1]

Sources

  1. 29 CFR 1926.652: Requirements for protective systemsOccupational Safety and Health Administration
  2. Titan Series Utility Trench ShieldKundel Industries
  3. Titan Utility Shields product sheet: Titan 3 Plus UtilityKundel Industries