The municipal ShoreLite Lite offer
A seller listing modified in December 2020 and captured in April 2021 described four tiers of a municipal starter kit. It named no buyer and did not document a shipment or current stock. [3]
The seller said the package “will feature” a 6×6 ShoreLite Lite modular aluminum trench box. That was the proposed starting point for the kits, not a description of an identified municipal asset. [3]
Kundel’s April 2005 ShoreLite Lite sheet describes a modular shielding and shoring family with several heights and sided layouts. It does not give a packing list or a permitted layout for a particular SLL-6×6. [4] [3]
How the four kits differed
A receiving crew could compare a delivery with the six adjusters specified for Intermediate. It could not use the fourth-tier list to check a connector count: the seller named square connectors but gave no quantity. [3]
Basic listed SLL-6×6 and six 30-inch spreaders. Intermediate kept those six spreaders and added six adjusters. The word “adjusters” denotes a separate entry, not six more spreaders. [3]
Complete kept both counts and added a 5-foot poly sling and a leg kit. The fourth tier, headed “Complete Kit & Ability to Make 3 & 4-Sided,” also named end panels and square connectors. The seller did not give quantities for the sling, leg kit, end panels or connectors. [3]
A packing list or receipt for the actual order can establish the missing quantities. The fourth heading alone does not establish which parts fit together in a three- or four-sided arrangement. [3]
What the kit name cannot establish
A shield protects people inside it against cave-in forces; shoring supports the excavation sides. Neither the family name nor the number of sides establishes which function a particular assembly is designed to serve. [1] [3]
OSHA requires cave-in protection except where the excavation is entirely in stable rock or is less than 5 feet deep and a competent person’s examination finds no indication of a potential cave-in. A protective system must resist all intended and reasonably expected loads. [2]
Where the design uses manufacturer’s tabulated data, the manufacturer’s specifications, recommendations and limitations govern. Departures need specific written manufacturer approval. Keep the written information on site while the system is constructed. [2] [3]
When a fleet kit changes hands
Match the marked panels, spreaders and connectors being issued to the drawing and data for that assembly. When a crew returns the kit, identify the asset and any damaged parts rather than assuming the next crew will receive the set first advertised. Manufactured protective equipment must be used and maintained in accordance with the manufacturer’s recommendations. [2]
A competent person must examine damaged equipment. If they cannot assure it can support the intended loads or is otherwise suitable, remove it from service until a registered professional engineer evaluates it and approves its return. [2]
Sources
- 29 CFR 1926.650: Scope, application, and definitions applicable to this subpartOccupational Safety and Health Administration
- 29 CFR 1926.652: Requirements for protective systemsOccupational Safety and Health Administration
- Municipality Trench Box Starter Kit (archived product page)TrenchShoringBoxes.com (archived listing)
- ShoreLite Lite product sheet (archived copy)Kundel document linked from original TrenchShoringBoxes listing (archived copy)