A proposed kit built around the Basic 3
The seller described a contractor starter kit that would feature a 6×6 Basic 3 steel trench box. The description was modified in October 2019 and preserved in April 2021. It is not a current offer or a record of a shipment. [3]
The linked Basic 3 sheet describes an all-steel shield family and includes weights and soil-specific ratings for named rows. It does not identify the unit or accessories in any individual order. [4]
What each package listed
The sling first appears under “4 Pieces Kit.” That identifies a difference in the advertised packages, not how many slings or adjusters a buyer received. [3]
“2 Pieces Kit” names 30-inch spreaders for the 6×6. “4 Pieces Kit” adds adjusters and a sling to the same spreaders. [3]
“6 Pieces Kit” names 30-inch and 60-inch spreaders, an adjuster, a sling and a leg kit. The seller also quotes ranges of 30–54 and 60–84 inches. These are not measurements of the work opening or confirmation that every setting is permitted on the box in hand. [3]
The three headings group items; they do not give the quantity of each one. For example, “2 Pieces” is not evidence of two of every part listed. Compare a current quote and delivery with the packing list for that order. [3]
What the 6×6 label leaves out
The Basic 3 is a shield: it withstands cave-in forces to protect workers inside. Its spreaders do not turn it into shoring that supports the excavation sides. [1]
The seller gives no key to the 6×6 label. Clear room at the pipe or between the spreaders depends on the identified assembly, not the package name. [1] [3]
A shield must resist intended and reasonably expected loads and must not be loaded beyond its design. Assess the identified box against the depth, soil, utilities and loads in the proposed excavation. [2] [3]
Can the machine handle the assembled box?
The archived Basic 3 sheet mentions small excavators and rubber-tired backhoes and lists a B3 - 6′ X 6′ - K row under H × L with a published weight in pounds. It also names lifting lugs as a feature. None of that identifies the assembled kit weight, handling instructions or a machine load chart for the offered equipment. [4] [3]
A competent person must examine damaged protective equipment. If its suitability cannot be assured, remove it from service until a registered professional engineer evaluates and approves its return. Use and maintain manufactured equipment in accordance with the manufacturer’s recommendations. [2] [1]
Restrict hazardous lateral movement and keep workers out of shields during installation, removal and vertical movement. A label naming lifting lugs is not a rigging plan; weight, approved handling points and machine capacity must cover the intended lift. [2]
Which manufacturer data apply?
For a shield designed using manufacturer’s tabulated data, follow all manufacturer specifications, recommendations and limitations. Any departure requires the manufacturer’s specific written approval. The written information must be at the jobsite while the system is constructed and available afterwards to the Secretary on request. [2]
The archived description gives no serial number or kit-specific manual. Match the marked shield and fitted accessories to the manufacturer’s applicable drawing and design data rather than borrowing limits from another Basic 3 row. [3] [4]
Sources
- 29 CFR 1926.650: Scope, application, and definitions applicable to this subpartOccupational Safety and Health Administration
- 29 CFR 1926.652: Requirements for protective systemsOccupational Safety and Health Administration
- Contractor Trench Box Starter Kit (archived product page)TrenchShoringBoxes.com (archived listing)
- Titan Basic 3 and 5 product sheet (archived copy)Kundel document linked from original TrenchShoringBoxes listing (archived copy)