Skip to content
Trench ShoringBoxes

Road plates

Kundel Trench Safety Plate: what the old listing identifies

Read the original steel designation as printed, distinguish a product description from a material certificate, and request the drawing for the plate actually offered.

Updated November 20, 20262 min read

What the listing actually says

The archived listing names a Kundel Trench Safety Plate. It describes stamped tread, orange paint, a removable swivel lift hook and a serial number intended for equipment tracking. Its material notation reads “ATSM A-36, A572-50.” That spelling is the seller’s wording, not a verified standard or a certificate for a specific piece of steel. [1]

Despite the words “1-thick-36” in the old listing address, the description gives no measured thickness and does not explain what 36 denotes. [1]

Identifying a particular plate

Match the serial marking and measured length, width and thickness to the drawing. A traceable material certificate would establish the steel grade; the listing’s paired designations do not. The hook mentioned by the seller also needs its own applicable handling instructions and condition check. [1] [3]

Why a similar brochure is not enough

Two records can both describe a steel crossing plate without describing the same product. The names below show why the Titan T1 brochure cannot supply the missing material certificate for the advertised Trench Safety Plate. [1] [2]

The archived seller record names a Trench Safety Plate; the manufacturer brochure names a Titan T1. Neither identifies the steel in a particular marked plate.Trench Safety PlateSeller listing: tread,paint and a serialmarking.Titan T1Brochure: a differentnamed product, not amaterial certificate.
Two plate names, two different records.

Kundel’s Titan T1 literature describes a different named product. Its comparison with a one-inch road plate is not a statement that the older listing offered the T1, that the listed steel was one inch thick, or that it shared the T1 panel ratings. Do not transfer a brochure value between those products. [2] [1]

For a public crossing, a surface description answers a different question from structural capacity. FHWA’s June 2022 discussion of temporary road plates describes traction and edge-transition concerns for riders. Neither tread nor paint shows what load a plate can carry over a particular opening. [3] [1]

Span and loading for the crossing

The seller mentioned foot traffic but gave no verified span, support or load basis for the plate in hand. Compare those conditions with its drawing and the road authority’s requirements for the proposed crossing. [1] [3]

Sources

  1. Kundel Trench Safety Plate, steel road plate (archived product page)TrenchShoringBoxes.com (original archived listing via Internet Archive)
  2. T1 Trench Plate product sheetKundel Industries
  3. Motorcycle Safety Noteworthy Practices: Infrastructure and Engineering (FHWA-SA-22-032)Federal Highway Administration